4 digit universal instrument DP545
- Universal inputs: mA, V, resistance/potmeter, Pt100, TC
- 2 relay outputs + analogue output
- Programmable range, function and setpoints
- Galvanic isolation between supply and internal electronics
- Made in accordance with the CE and EMC regulations
The DP545is supplied with universal metering inputs for direct connection to Pt100 and various TC temperature sensors, as well as linear current, voltage and resistance/ potentiometer signals.
Built-in voltage references enables direct connection of 3-wire potentiometers and 2-wire transmitters.
The instrument is supplied with 1 analogue output and 2 relay outputs, all outputs are programmable.
A digital control input can be used for either HOLD function or display reset (tare).
Programming of the in- and output ranges is possible either with internal pre-calibrated signals or with external signals.
The unit is fully programmable via the keys on the front panel, and access limitation in several levels is possible.
Reaction delay on both the display reading and the output relays is programmable too.
On the front panel there is a field, in which the metering unit (%, °C, kg, ....) can be inserted.
Universal metering input:
The input configuration is programmable, and the selection between input pins, metering current etc. is automatically selected, when the actual input is programmed.
Pt100 temperature metering with 3-wire cable compensation. It is possible to enter a manual correction of the metering signal.
TC temperature metering with standard thermocouple sensors, either with internal CJC or manually programmed CJC temperature.
Linear resistance metering with 3-wire cable compensation.
DC current metering with built-in input protection.
DC voltage metering, either direct metering, or relatively via 3-wire potentiometer.
2-wire transmitter current metering via built-in supply for transmitter.
Galvanically isolated input for display HOLD or reset (tare) function.
2 relay outputs with change-over contacts. Function, setpoint, delay, etc. is programmable.
1 analogue output, programmable in the range 0-20 mA / 0-10 V, normal or inverted function.
Display / operation:
4-digit LED (+/-9999) with programmable display intensity and decimal point, 2 LED's for relay position, 2 LED's for input trend (rising/falling), and 4 LED's used during programming.
3 buttons used during programming.