tachometer relay RR10
tachometer relay RR10
| 3 metering ranges, from 10 rpm. to 20.000 rpm. Adjustable start-up delay, from 0 to 10 seconds. Universal pulse inputs for contact, NPN/PNP sensor,Namur sensor, etc. Selectable latch function. 1-pole relay output. DC supply or AC supplies up to 230 VAC Made in accordance with the CE and EMC regulations |
|
| The C-mac tachometer relay type RR10 can be used for
many different kinds of speed monitoring. The relay is available in 3 different metering
ranges, calibrated in rpm (revolutions per minute). The relay is supplied with universal pulse inputs, which enables you to use many different types of sensors. In addition, the relay can also deliver the supply voltage to the sensor. You can select, if you want the output relay to release at too high or too low speed. You can also select a latch function, which means the relay will stay deactivated, if the set limit has once been exceeded. The latch is cancelled by disconnection of the latch input or the supply voltage. When the function, where the relay is released at too low speed, is selected, the adjustable time-delay can be used to ensure that the unit, which is monitored, can reach its correct speed, before the module starts monitoring. |
Connection diagram:
|
|
Standard supply
voltages:
|
Standard metering ranges: 10 - 200 rpm 100 - 2000 rpm 1000 - 20000 rpm other ranges upon request |
|
